Front View Swing Arm: Difference between revisions
JosephBamert (talk | contribs) roll center |
JosephBamert (talk | contribs) →Roll Center: picture |
||
| Line 8: | Line 8: | ||
== Roll Center == | == Roll Center == | ||
[[File:Annotation 2025-07-15 134306.png|thumb|397x397px|Example of a roll center]] | |||
Using the FVSA, the roll center can be found. First find the FVSA of each wheel. Then, create a line from each instant center to its respective wheel's contact patch. The point where these 2 lines intersect is the car's roll center at that ride height. The roll center height is used to calculate the roll moment of the vehicle. | Using the FVSA, the roll center can be found. First find the FVSA of each wheel. Then, create a line from each instant center to its respective wheel's contact patch. The point where these 2 lines intersect is the car's roll center at that ride height. The roll center height is used to calculate the roll moment of the vehicle. | ||
Revision as of 17:46, 15 July 2025
Front View Swing Arm (FVSA) is a theoretical line between the center of the upright to the FVSA instant center. The FVSA instant center is determined by the upper and lower control arm's geometry and current ride height. FVSA determines camber gain, tire lateral scrub rate, and roll center height. The FVSA instant center moves with ride height change. Thus, it will change over the course of a drive.
Camber Curves
As the wheel travels, the instant center changes due to the outer control arms position changing. By changing the control arm's geometry, the wheels camber can change at different rates throughout its travel.
(add the math)
Roll Center
Using the FVSA, the roll center can be found. First find the FVSA of each wheel. Then, create a line from each instant center to its respective wheel's contact patch. The point where these 2 lines intersect is the car's roll center at that ride height. The roll center height is used to calculate the roll moment of the vehicle.
